Receive 30% discount when you try my audio engineer services for the first time.

TACTBOOGIE.COM
TACTBOOGIE.COM
  • 6 Tips For Recording Good Vocals

    So, you have written that perfect verse or song and it is a must you record it. I must admit, I have been there so I understand your passion. What I hear in a lot of independent music today is the neglect of proper vocal tracking (recording). Yes, you have a decent microphone plugged into a decent pre-amp.


    But are you considering the input levels? Are the output levels reading around -12 db? Are you recording with effects like delay or reverb? Is your microphone even placed correctly with a pop filter?


    These are the questions you should ask yourself before you press record and go in on the verse you spent time perfecting. Recording it should be just as important if not more. As a mix engineer, “fixing it in the mix” is taboo. It leads to more work. Most issues are fixable, but why ruin a “perfect” verse or song because of an overly compressed vocal mix. Fix it in the recording phase. In others words, do it right the first time. It’s worth it. 


    Here is a quick check list to reference:


    1. Mic positioning - tone is affected so search for the best sound for you

    2. Pop filter - 3 to 6 inches away from microphone

    3. Input - loud enough to hear all the words without distortion

    4. Output - pre-fader meters should read around -10 to -14 db. (-12 db is good)

    5. Performance position - about 3 to 6 inches from the pop filter, staying within the circle to avoid exaggerated dynamics

    6. Always record dry - effects cant be changed once recorded, and leave the EQing to the mixer. Unless its you!


    The purpose of this post was to share a little insight on getting your vocals to stand out on a song. With the above techniques, any decent mix engineer or yourself, can process professional quality vocals.


    Hope to hear great sounding vocals, even if it is just a demo or mixtape.